The LAN module is intended for remote control of the central heating boiler operation regulator. by ProND with an RJ12 connector for connecting the PILOT room panel (1-Wire communication) or with an RJ12 connector for RS485, RS232 communication. The regulator works with a wide range of ProND products. The possibilities and application depend on the controller to which this module is connected.'
REG 1 blower speed controller is a universal controller specifically designed for different types of blowers powered from the mains voltage of 230V. Adjusting the minimum rotations allows to use the entire useful range of characteristics of the blower. The device is used in systems where there is a need to enhance a single-phase motor control system with the adjustment of its rotations.
ART P+ microprocessor controller is a universal controller for the C.H. pump. The ease of use and reliability make it the most widely used controller in the C.H. systems without an air-supply.
Description: ART PDW controller is a controller for fine coal and hopper boilers and at the same time a successor of the ART PD controller. ART PDW microprocessor controller is designed to control the blower and circulating pump in the C.H. systems where there is no need to adjust the speed of the fan (adjustable air inlet by the aperture of the blower). It has an output for connecting a remote control.
ART ZW microprocessor controller is a controller designed to control the actuator with the mixing valve pump. In addition, a room thermostat or a remote control can be connected to the controller, which further enhances its functionality. The ART ZW controller allows to extend the features of the existing heating system at low cost without replacing the controller controlling the operation of the boiler.
The regulator Krypton B is a modern regulator for fine coal and hopper boilers with an jacket. It is used in hot air heating systems for halls and buildings. Krypton B microprocessor controller is used to control the operation of two blowers supplying air to a burner and a hot air blower. It has an output for connecting a remote control which further enhances its usability. The controller continuously and automatically controls the blower and maintains a pre-set boiler temperature at a constant level. This solution ensures that there are no rapid temperature changes in the boiler. The use of this controller improves the operation ergonomics: no need to interfere in the settings of the driver in case of a change of fuel.
The REG 2 blower speed regulator is a universal regulator designed for various types of blowers supplied from 230V mains voltage, the power of which does not exceed 200W. The device is used in systems where there is a need to expand the control system of a single-phase motor with the regulation of its rotation.
Argon 110 controller is a modern controller for boilers with an air jacket that support the feeding screw. It is used in hot air heating systems for halls and buildings. Argon 110 microprocessor controller is designed to control the blower supplying air to a burner, a feeding screw and two hot air blowers. It has an output for connecting a remote control which further enhances its usability.
ART C + microprocessor controller is a universal controller for the H.T.W. pump. The ease of use and reliability make it the most widely used controller in simple H.T.W. control systems.
IRYD 610 is a controller designed to control the operation of a central heating boiler with a feeding screw. The controller controls an extensive heating installation. A specially designed menu enables gradual activation of further functions and possibilities of the regulator. This regulator has a special fuzzy logic pid operation algorithm, which, after the user specifies the maximum and minimum boiler power, can smoothly select the appropriate fuel doses depending on the load on the installation and the type of fuel. The regulator controls the blower operation continuously by selecting the appropriate amount of fuel for the given blower speed. In addition, this version is equipped with an additional pid algorithm influencing the flue gas temperature, regulating the boiler power so that the flue gas temperature does not exceed the maximum value set by the user. These modern control algorithms allow you to save on the amount of fuel burned, and thus have a beneficial effect on the natural environment. Additionally, up to 5 mixing valve control modules, an internet module and a room panel can be connected to the regulator, which allows for a significant expansion of the heating system.
YETI controller is a universal controller for fine coal and hopper boilers. YETI microprocessor controller is designed to control the blower and circulating pumps in the C.H. systems. It has an output for connecting a remote control.
The REG 3 microprocessor-based blower fan speed controller is designed to control the operation of a single-phase blower powered from 230V mains voltage. The device has the ability to control the blower rotation from an external source, it has a 0V-10V control input which allows the REG-3 to work with industrial controllers that support this standard. Moreover, the regulator has an input that triggers the regulation to which a 230V signal can be connected (e.g. from a device whose activation is also to start a blower connected to the REG-3 regulator). The controller has an "ENABLE" input which "allows" to turn on the blower. The blower can start running if this input is short-circuited.
ART PW microprocessor controller is a universal controller for C.H. or H.T.W. pumps. It has an input for connecting a remote control which makes the controller even more functional. The ease of use and powerful algorithm allow to use this controller for virtually most systems in which the pump is used.
Controller IRYD RTZ PID RS COLOR
IRYD RTZ pid fuzzy logic RS COLOR controller is designed to control the operation of the C.H. boiler with a feeding screw or a ram feeder (with a feeder position sensor). The controller controls an extensive heating system. A specially designed menu allows to progressively activate further features or abilities of the controller. This controller has a special algorithm of work, pid fuzzy logic, which after determining by the user of a maximum and minimum output of the boiler is able to smoothly choose the appropriate dosage of fuel depending on the load of the system and the type of fuel. The controller controls continuously the blower operation choosing the right amount of fuel to a specific blower speed. In addition, this version has an additional algorithm pid, affecting the exhaust gas temperature and regulating the power of the boiler so that the value of the exhaust gas temperature does not exceed the maximum temperature pre-set by the user. These modern control algorithms allow to save on the amount of burned fuel, and which has a positive impact on the environment.
Description: The PROTON controller is a modern regulator for fine coal and hopper boilers and a successor of one of the most reliable controllers on the market - YETI controller. PROTON, a microprocessor controller, is designed to control the operation of the blower and a circulating pump in the C.H. systems; it has an output for connecting a remote control.
Device operating time regulator REG-T
REG-T - a microprocessor controller of the operating time is designed for switching the time actuator. The controller has 10 programmable time sets, while each set contains 5 time settings. After the contact of the switch end, the controller switches on the device and then after a given time switches it off. After the next switching of the limit switch, the unit will be switched on for the next programmed time.
ART PCW microprocessor controller is a universal controller for C.H. and H.T.W. pumps. It has an input to connect a remote control that makes the controller more functional. The ease of use and powerful algorithm allow to use this controller for virtually most systems in which the pump is used.
Algorytm pid – The PID algorithm Description: PROTON PID controller is a modernized version of the PROTON controller, with an added PID algorithm, making it one of the most reliable and the most fuel-efficient controllers on the market. A PROTON PID microprocessor controller is designed to control the operation of the blower and the circulation pump in the C.H. systems; it has output for connecting a remote control which further enhances its usability. This controller continuously and simultaneously automatically controls the blower to maintains a boiler temperature at a constant level. This solution ensures that there are no rapid temperature changes in the boiler. The use of this controller improves the operation ergonomics: there is no need to interfere in settings the controller in the case of a change of
The H.T.W. pump Description: The H.T.W. PROTON is a modern regulator for fine coal and hopper boilers with a support for and hot water H.T.W. pump. PROTON H.T.W. microprocessor controller is designed to control the operation of the blower, the circulating pump and the H.T.W. pump in C.H. systems. It has an output for connecting a remote control.
The PILOT R WiFi remote control panel is a functional device compatible with PROND regulators equipped with an RJ12 socket for remote control connection. PILOT enables remote monitoring of the operation of devices such as a feeder, blower or central heating pump. Moreover, it enables remote change of boiler / circuit settings, and has the function of a room thermostat (turning off the circulation pump when the room is heated up). The WiFi version has an additional wireless module for communication with PILOT R via a simple website.
