Internet module MI-95

Internet module MI-95

The LAN module is intended for remote control of the central heating boiler operation regulator. by ProND with an RJ12 connector for connecting the PILOT room panel (1-Wire communication) or with an RJ12 connector for RS485, RS232 communication. The regulator works with a wide range of ProND products. The possibilities and application depend on the controller to which this module is connected.'

Blower speed controller REG-1

Blower speed controller REG-1

REG 1 blower speed controller is a universal controller specifically designed for different types of blowers powered from the mains voltage of 230V. Adjusting the minimum rotations allows to use the entire useful range of characteristics of the blower. The device is used in systems where there is a need to enhance a single-phase motor control system with the adjustment of its rotations.


Controller ARGON 3

Controller ARGON 3

Argon 3 controller is a universal controller for boilers with a feeding screw, and the successor of a reliable controller Argon 2. An improved control algorithm makes the combustion process more optimal. Argon 3 microprocessor controller is designed to control the feeding screw, the blower, the C.H. pump, and the H.T.W. pump. It has an output for connecting a remote control which further enhances its usability.


Controller ART P+

Controller ART P+

ART P+ microprocessor controller is a universal controller for the C.H. pump. The ease of use and reliability make it the most widely used controller in the C.H. systems without an air-supply.


Controller ART PDW

Controller ART PDW

Description: ART PDW controller is a controller for fine coal and hopper boilers and at the same time a successor of the ART PD controller. ART PDW microprocessor controller is designed to control the blower and circulating pump in the C.H. systems where there is no need to adjust the speed of the fan (adjustable air inlet by the aperture of the blower). It has an output for connecting a remote control.

Controller ART ZW

Controller ART ZW

ART ZW microprocessor controller is a controller designed to control the actuator with the mixing valve pump. In addition, a room thermostat or a remote control can be connected to the controller, which further enhances its functionality. The ART ZW controller allows to extend the features of the existing heating system at low cost without replacing the controller controlling the operation of the boiler.


Controller KRYPTON B

Controller KRYPTON B

The regulator Krypton B is a modern regulator for fine coal and hopper boilers with an jacket. It is used in hot air heating systems for halls and buildings. Krypton B microprocessor controller is used to control the operation of two blowers supplying air to a burner and a hot air blower. It has an output for connecting a remote control which further enhances its usability. The controller continuously and automatically controls the blower and maintains a pre-set boiler temperature at a constant level. This solution ensures that there are no rapid temperature changes in the boiler. The use of this controller improves the operation ergonomics: no need to interfere in the settings of the driver in case of a change of fuel.


Room control panel PILOT R

Room control panel PILOT R

Remote control panel of PILOT R is a functional unit operating with controllers made by PROND. It is equipped with RJ12 socket for connecting the remote control. PILOT R enables remote monitoring of devices such as a feeder, blower and a C.H. pump. It also allows to remotely change the settings of the boiler/circulation, and has a function of a room thermostat (switching off the circulating pump when the room is warmed).


Blower speed controller REG-2

Blower speed controller REG-2

The REG 2 blower speed regulator is a universal regulator designed for various types of blowers supplied from 230V mains voltage, the power of which does not exceed 200W. The device is used in systems where there is a need to expand the control system of a single-phase motor with the regulation of its rotation.

 

Controller ARGON 110

Controller ARGON 110

Argon 110 controller is a modern controller for boilers with an air jacket that support the feeding screw. It is used in hot air heating systems for halls and buildings. Argon 110 microprocessor controller is designed to control the blower supplying air to a burner, a feeding screw and two hot air blowers. It has an output for connecting a remote control which further enhances its usability.


Controller ARGON 3P

Controller ARGON 3P

Argon 3P is a universal controller for boilers with a feeding screw, and the successor of a reliable Argon P controller. An improved control algorithm makes the combustion process more optimal. Argon 3P microprocessor controller is designed to control the operation of a feeding screw, a blower, a C.H. pump, and a H.T.W. pump. It has an output for connecting a remote control which further enhances its usability. Different types of housings in which the controller is available allow its mounting on the boiler or a tank with fuel, on the wall in the boiler room, under the boiler construction, in the control cabinet, on a bus.


Controller ART C+

Controller ART C+

ART C + microprocessor controller is a universal controller for the H.T.W. pump. The ease of use and reliability make it the most widely used controller in simple H.T.W. control systems.


Controller YETI

Controller YETI

YETI controller is a universal controller for fine coal and hopper boilers. YETI microprocessor controller is designed to control the blower and circulating pumps in the C.H. systems. It has an output for connecting a remote control.

Room control panel PILOT G

Room control panel PILOT G

A remote control panel of PILOT G is a modern and functional device operating with controllers made by PROND. It is equipped with RJ12 socket for connecting the remote control, and also is the successor of a remote control panel of PILOT R. PILOT G enables remote monitoring of such devices as a feeder, blower and a C.H. pump. It also allows to remotely change the settings of the boiler/circulation, changing the setting of the H.T.W. and has a function of a room thermostat (switching off the circulating pump when the room is warmed). It has built-in time zones (temperature programming for the whole week)


Blower speed controller REG-3

Blower speed controller REG-3

The REG 3 microprocessor-based blower fan speed controller is designed to control the operation of a single-phase blower powered from 230V mains voltage. The device has the ability to control the blower rotation from an external source, it has a 0V-10V control input which allows the REG-3 to work with industrial controllers that support this standard. Moreover, the regulator has an input that triggers the regulation to which a 230V signal can be connected (e.g. from a device whose activation is also to start a blower connected to the REG-3 regulator). The controller has an "ENABLE" input which "allows" to turn on the blower. The blower can start running if this input is short-circuited.

Controller ART PW

Controller ART PW

ART PW microprocessor controller is a universal controller for C.H. or H.T.W. pumps. It has an input for connecting a remote control which makes the controller even more functional. The ease of use and powerful algorithm allow to use this controller for virtually most systems in which the pump is used.


Controller PROTON

Controller PROTON

Description: The PROTON controller is a modern regulator for fine coal and hopper boilers and a successor of one of the most reliable controllers on the market - YETI controller. PROTON, a microprocessor controller, is designed to control the operation of the blower and a circulating pump in the C.H. systems; it has an output for connecting a remote control.

Device operating time regulator REG-T

Device operating time regulator REG-T

REG-T - a microprocessor controller of the operating time is designed for switching the time actuator. The controller has 10 programmable time sets, while each set contains 5 time settings. After the contact of the switch end, the controller switches on the device and then after a given time switches it off. After the next switching of the limit switch, the unit will be switched on for the next programmed time.


Controller ART PCW

Controller ART PCW

ART PCW microprocessor controller is a universal controller for C.H. and H.T.W. pumps. It has an input to connect a remote control that makes the controller more functional. The ease of use and powerful algorithm allow to use this controller for virtually most systems in which the pump is used.


Controller PROTON PID

Controller PROTON PID

Algorytm pid – The PID algorithm Description: PROTON PID controller is a modernized version of the PROTON controller, with an added PID algorithm, making it one of the most reliable and the most fuel-efficient controllers on the market. A PROTON PID microprocessor controller is designed to control the operation of the blower and the circulation pump in the C.H. systems; it has output for connecting a remote control which further enhances its usability. This controller continuously and simultaneously automatically controls the blower to maintains a boiler temperature at a constant level. This solution ensures that there are no rapid temperature changes in the boiler. The use of this controller improves the operation ergonomics: there is no need to interfere in settings the controller in the case of a change of